Part Number Hot Search : 
KBU605 AP432AW STD432 PD3032 FA7703 10N65B IRLL014N TFR433N
Product Description
Full Text Search
 

To Download 334MKP275K Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 MKP
* EMI filter * Antenna coupling
Operating Temperature Range Capacitance Tolerance Voltage Range 50-60Hz Dissipation Factor VAC
Class X2 Radial Lead Metallized Polypropylene Capacitors
* Across the line * Line bypass
-40C to +110C 10% at 1kHz, 25C 310 (UL, CSA) 275 (IEC 60384-14) 0.1% at 1 kHz, 20C
Capacitance Terminal to Terminal
15,000M at 100VDC 5,000 M x F at 100VDC
Terminal to Case
>30,000 M at 100VDC >500M at 500VDC >30,000 M at 100VDC >500M at 500VDC
Insulation Resistance
0.33 F >0.33 F
1000 hours at+110C with 125% of rated voltage with the voltage increased to 1000Vrms for 0.1 seconds every hour. Load Life
Capacitance Change Dissipation Factor Insulation Resistance
Capacitance 0.33uF >0.33uF 3000 M <5% maximum of initial measured value <0.15% at 1kHz Terminal to Terminal 7500 M Minimum at 100VDC 2500 MxuF Minimum at 100VDC Terminal to Case
500 hours at 90 to 95% RH, 40C and no voltage applied after which the following voltage shall be applied for 1minute to each capacitor C0.0068uF 1500VAC, C>0.0068uF 1075VDC
Capacitance Change
<5% of initial measured value <0.15% at 1kHz Capacitance 0.33uF >0.33uF Terminal to Case 24 pulses Terminal to Terminal 7500 M Minimum at 100VDC 2500 MxuF Minimum at 100VDC 15000 M at 100 VDC C 1.0uF Vp=2.5kVDC C>1.0uF Vp=2.5kV/C 1 nH/mm along the capacitor pitch and lead length C0.0068uF 1500Vac or 2121 Vdc for 1 minute C>0.0068uF 1000Vac or 1768 Vdc for 1 minute Cut-off current: 2Aac or 10mAdc Current limiting resistance: 1/V 2050VAC applied for 1 minute. <1 nH/mm along the capacitor pitch and lead length -200 ppm/C, 100ppm/C Wound, Extended metallized film Polypropylene film Vacuum deposited zinc layers Tinned copper wire (lead free) Solvent resistant box with flame retardant epoxy sealed resin (UL 94V-O)
Humidity Test
Dissipation Factor Insulation Resistance
Voltage Impulse Test Self-inductance
Terminal to Terminal Terminal to Case
Dielectric Strength
Capacitance Drift Factor Capacitance Temperature Coefficient Construction Dielectric Electrodes Leads Coating
(R)
3757 W. Touhy Ave., Lincolnwood, IL 60712 * (847) 675-1760 * Fax (847) 673-2850 * www.illcap.com
MKP
Capacitance (F) PART NUMBER dv/dt (v/s) LxHxT (mm) S d
Class X2 Radial Lead Metallized Polypropylene Capacitors
STANDARD PART LISTING
Capacitance (F) PART NUMBER dv/dt (v/s) LxHxT (mm) S d
0.0047 0.0047 0.0056 0.0056 0.0068 0.0068 0.0082 0.0082 0.01 0.01 0.01 0.012 0.012 0.015 0.015 0.015 0.018 0.018 0.022 0.022 0.022 0.027 0.027 0.033 0.033 0.033 0.039 0.039 0.039 0.047 0.047 0.047 0.056 0.056 0.056 0.068 0.068 0.082 0.082 0.1 0.1
472MKP275K 472MKP275KC 562MKP275KC 562MKP275KD 682MKP275K 682MKP275KC 822MKP275KC 822MKP275KD 103MKP275K 103MKP275KC 103MKP275KE 123MKP275KC 123MKP275KD 153MKP275K 153MKP275KC 153MKP275KE 183MKP275KC 183MKP275KD 223MKP275K 223MKP275KB 223MKP275KC 273MKP275KC 273MKP275KD 333MKP275K 333MKP275KC 333MKP275KE 393MKP275KC 393MKP275KD 393MKP275KE 473MKP275K 473MKP275KC 473MKP275KD 563MKP275KC 563MKP275KD 563MKP275KE 683MKP275K 683MKP275KD 823MKP275KD 823MKP275KE 104MKP275K 104MKP275KD
400 500 500 400 400 500 500 400 400 500 300 500 400 400 500 300 500 400 400 300 500 500 400 400 500 300 500 400 300 300 500 400 500 400 300 300 400 400 300 300 400
13x10x5 10x8x4 10x8x4 13x10x5 13x10x5 10x8x4 10x8x4 13x10x5 13x10x5 10x8x4 18x11x5 10x8x4 13x10x5 13x11x5 10x9x4 18x11x5 10x9x4 13x11x5 13x11x5 18x11x5 10x9x4 10x10x5 13x11x5 13x12x6 10x10x5 18x11x5 10x11x5 13x9x4 18x11x5 18x11x5 10x12x6 13x10x5 10x12x6 13x10x5 18x11x5 18x11x5 13x11x5 13x12x6 18x11x5 18x11x5 13x12x6
10 7.5 7.5 10 10 7.5 7.5 10 10 7.5 15 7.5 10 10 7.5 15 7.5 10 10 15 7.5 7.5 10 10 7.5 15 7.5 10 15 15 7.5 10 7.5 10 15 15 10 10 15 15 10
0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.6 0.6 0.6 0.8 0.6 0.6 0.6 0.8 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.6 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.6 0.6 0.8 0.8 0.8
0.12 0.15 0.15 0.15 0.18 0.18 0.22 0.22 0.27 0.33 0.33 0.39 0.39 0.47 0.47 0.47 0.56 0.56 0.56 0.68 0.68 0.82 0.82 1 1 1.2 1.5 1.5 1.8 2.2 2.2 3.3 3.3 3.9 4.7 4.7 5.6 6.8 8.2 10
124MKP275KD 154MKP275K 154MKP275KD 154MKP275KE 184MKP275KE 184MKP275KG 224MKP275K 224MKP275KB 274MKP275KE 334MKP275K 334MKP275KE 394MKP275KE 394MKP275KG 474MKP275KE 474MKP275K 474MKP275KB 564MKP275KE 564MKP275KG 564MKP275KH 684MKP275K 684MKP275KG 824MKP275KG 824MKP275KH 105MKP275K 105MKP275KG 125MKP275KG 155MKP275K 155MKP275KE 185MKP275KE 225MKP275K 225MKP275KE 335MKP275KH 335MKP275KJ 395MKP275KJ 475MKP275KH 475MKP275KJ 565MKP275KJ 685MKP275KJ 825MKP275KJ 106MKP275KJ
400 180 400
13x13x7
10
0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
26x14.5x6 22.5 13x14x8 10 15 15
300 18x13.5x7.5 300 180 180 300 18x12x6
26x14.5x6 22.5 26x14.5x6 22.5 18x14x8 15 15
300 18x14.5x7.5 180
26x17x8.5 22.5 15 15
300 18x13.5x10 300 180 300 120 180 300 180 120 120 180 180 120 120 180 180 120 180 180 120 180 100 18x17x8
26x16.5x7.5 22.5 18x18x9 32x18x9 26x16.5x7 18x19x10 15 27.5 22.5 15
26x16.5x7.5 22.5 31x20x10 31x20x10 26x17x8 26x18x9 31x20x11 31x20x11 26x19x10 26x20x11.5 31x23.5x14 26x22x12 26x24x14 31x26x18 26x25x15 31x33x18 27.5 27.5 22.5 22.5 27.5 27.5 22.5 22.5 27.5 22.5 22.5 27.5 22.5 27.5
100 41.5x28.5x16 37.5 100 120 100 100 100 100 100 41.5x35x20 31.5x37x22 41.5x32x19 41.5x35x20 41.5x39x24 41.5x45x30 41.5x45x30 37.5 27.5 37.5 37.5 37.5 37.5 37.5
Convert to inches, divide by 25.4
(R)
3757 W. Touhy Ave., Lincolnwood, IL 60712 * (847) 675-1760 * Fax (847) 673-2850 * www.illcap.com
MKP
Class X2 Radial Lead Metallized Polypropylene Capacitors
PHYSICAL DIMENSIONS
L max
T max N
Cy Cx L
H max
Cy
5 min.*
S0.5 d0.05 All dimensions in (mm)
X2 capacitors are used to suppress electrical noise by reducing the input impedance of the device incorporating the capacitor. X2 capacitors are connected across the supply line where failure of the capacitor will not result in,personal exposure to electrical shock. X2 capacitors are to be used in applications where the peak voltage is 1200V.
*17mm lead length available upon request
Safety Agency
UL CSA CB ENEC
Standard
1414 C22.2, No.1-98, 8-M1986 IEC-60384-14 EN-1324000 IEC-60384-14
File #
E-317132 158927, LR85363 DE-1-11829 139131L
Rated Voltage
310 VAC 250 VAC 275 VAC 275 VAC
Class
FOK X2*A FOK Y2*B X X2 X2
A- Antenna coupling, Line Bypass, Across the line B- Electromagnetic Interference Filter
(R)
3757 W. Touhy Ave., Lincolnwood, IL 60712 * (847) 675-1760 * Fax (847) 673-2850 * www.illcap.com


▲Up To Search▲   

 
Price & Availability of 334MKP275K

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X